Home » Shop » hot sale » Breezaire WKCE 1060 Wine Cabinet Cooling Unit

Breezaire WKCE 1060 Wine Cabinet Cooling Unit

Original price was: $344.80.Current price is: $269.60.

Sale!

98 in stock

SKU: PRFXM416595 Category:

Through-the-Wall Cooling System for Cellars Up to 140 Cubic Feet

The Breezaire WKCE 1060 is a 1060 BTU self-contained, through-the-wall wine cellar cooling unit designed for properly insulated wine rooms up to 140 cubic feet.

It operates on 115V power (3 amps), features the Digital Sentry III thermostat, automatic defrost, and automatic humidity regulation via evaporation. The unit exhausts warm air through the rear or top and delivers cold air from the bottom.

When correctly sized and installed, the WKCE 1060 maintains stable aging conditions for small residential wine cellars.

Is the WKCE 1060 the Right Unit for Your Cellar?

Cellar Condition WKCE 1060 Suitable?
Up to 140 cu. ft. (properly insulated) Yes
Fully sealed with vapor barrier Yes
Standard insulated wine cellar door Yes
Open to another room ❌ No
Large uninsulated glass panels ❌ Not recommended
Poor insulation or no vapor barrier ❌ No
150–250 cu. ft. cellar ⚠️ Consider WKCE 2200

Cooling capacity assumes proper insulation and a sealed enclosure. Undersized units will run continuously and fail to maintain stable temperature.

If your cellar is near the upper limit or has glass exposure, consult sizing support before ordering.

Need more cooling power? Check out theBreezaire WKCE 2200 — same quiet operation, with higher capacity for bigger cabinets.

What the WKCE 1060 Is Designed to Do

This unit is built for wine preservation, not comfort cooling.

It is engineered to:

  • Maintain stable aging temperatures (typically 55°F)
  • Minimize vibration
  • Operate continuously without short cycling
  • Preserve natural cellar humidity
  • Protect wine from heat fluctuations

Residential air conditioners are not designed for this application.

Installation Requirements (Critical)

Proper installation determines performance and longevity.

1. Insulation Requirements

  • R-19 walls (recommended minimum)
  • R-30 ceiling (recommended)
  • Continuous vapor barrier
  • Insulated wine cellar door

2. Ventilation Requirements

  • Exhaust must vent into an adjacent interior space
  • That space must be large enough to dissipate heat
  • Ambient exhaust area should remain within normal room temperature ranges
  • Not designed for outdoor exposure without protective enclosure

3. Not Designed For

  • Open-concept rooms
  • Non-insulated closets
  • Garages without climate control
  • Large glass-heavy display rooms
  • Exterior wall exposure without weather protection

Improper installation reduces performance and may shorten compressor life.

Installation & User Manuals

  • WKCE 1060 Installation Manual
  • Breezaire Sentry III Controller Owner’s Manual
  • Breezaire Warranty

Technical Specifications – Breezaire WKCE 1060

Performance & Capacity

Feature Details
Cooling Capacity Up to 140 cubic feet
BTU Rating 1060 BTU
Noise Level 58 dBA (typical operation)

Installation & Airflow

Feature Details
Installation Through-the-wall (self-contained)
Cold Air Discharge Bottom
Hot Air Exhaust Rear or Top
Venting Adjacent interior space

Dimensions & Weight

Feature Details
Dimensions (H x W x D) 10.5″ x 18″ x 16.5″
Weight 45 lbs

Electrical

Feature Details
Voltage 115V
Frequency 60Hz
Amperage 3 Amps

Controls & Operation

Feature Details
Thermostat Digital Sentry III
Display Digital Readout
Humidity Control Automatic via evaporation
Defrost System Automatic

The Digital Sentry III thermostat allows precise temperature adjustment and stable long-term performance.

Warranty

Coverage Term
Labor 1 Year
Parts 5 Years

Manufacturer warranty applies when installed according to specifications.

WKCE 1060 vs WKCE 2200

Feature WKCE 1060 WKCE 2200
Capacity Up to 140 cu. ft. Up to 265 cu. ft.
Best For Small enclosed cellars Medium cellars
Upgrade Scenario Tight spaces, small builds Growing collections

If your cellar exceeds 140 cubic feet, the WKCE 2200 is typically recommended.

Why Choose Breezaire

Breezaire systems are engineered specifically for wine storage environments. They are widely used in residential wine cellars and purpose-built wine rooms.

When purchased through an authorized dealer, you receive:

  • Full manufacturer warranty coverage
  • Access to official installation manuals
  • Model-specific sizing guidance
  • U.S.-based support

Breezaire – Set & Adjust All Settings

Breezaire Sentry III Reset

Breezaire Set & Adjust Temperature

Breezaire Bottle Probe

When should I upgrade to the WKCE 2200?

Upgrade if:

  • Your cellar exceeds 140 cubic feet
  • You have large glass panels
  • You anticipate expanding your collection
  • Your space str les to maintain stable temperature

Expert Recommendation

The WKCE 1060 is best suited for:

  • Small enclosed wine rooms
  • Under-stair cellars
  • Built-in residential wine closets
  • Properly insulated retrofit installations

It is not a substitute for a split system in large, glass-heavy, or luxury display environments.

If your cellar is near capacity limits or has insulation concerns, consult before ordering to prevent undersizing.

Order the Breezaire WKCE 1060

When properly sized and installed, the WKCE 1060 provides stable, long-term climate control for small dedicated wine cellars.

If you need help confirming compatibility, our team can assist before purchase.